home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Language/OS - Multiplatform Resource Library
/
LANGUAGE OS.iso
/
prolog
/
sbprolog
/
amiga
/
v3_1
/
sbp3_1c.lzh
/
prolog3.1
/
modlib
/
src
/
$deb.P
< prev
next >
Wrap
Text File
|
1991-11-23
|
12KB
|
354 lines
/************************************************************************
* *
* The SB-Prolog System *
* Copyright SUNY at Stony Brook, 1986; University of Arizona, 1987 *
* *
************************************************************************/
/*-----------------------------------------------------------------
SB-Prolog is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY. No author or distributor
accepts responsibility to anyone for the consequences of using it
or for whether it serves any particular purpose or works at all,
unless he says so in writing. Refer to the SB-Prolog General Public
License for full details.
Everyone is granted permission to copy, modify and redistribute
SB-Prolog, but only under the conditions described in the
SB-Prolog General Public License. A copy of this license is
supposed to have been given to you along with SB-Prolog so you
can know your rights and responsibilities. It should be in a
file named COPYING. Among other things, the copyright notice
and this notice must be preserved on all copies.
------------------------------------------------------------------ */
/* $deb.P */
/* Trace and Debug package */
/* To be able to trace execution, you should either consult the
file containing the predicate definitions or compile them with the 't'
option and load them. The 't' option keeps the assembler from optimizing
subroutine linkage and allows the trace to intercept any call. To trace
the system, all predicates to be traced must be passed to trace/1. For
example,
:- trace([pred1/1,pred2/2]),trace(pred3/2).
will set up tracing of pred1, pred2 and pred3 (of the indicated arities.)
The compile and consult predicates have been modified to
return a list of predicates defined, which can be directly passed to trace,
to set up interception. This also turns tracing on. The facilities are
roughly similar to CProlog's debugging facility, but you can only trace
routines for which you've done a trace/1. This makes trace and spy very
similar; it is essentially just two levels of spy points. The times that
tracing (and spying) occur differ somewhat from CProlog's. Here tracing
occurs at Call (i.e., entry to a predicate), successful Exit from a clause,
and Failure of an entire call. Skip, leap, etc. work in ways similar to
CProlog. We do not support the leashing modes of CProlog (but it would be
easy enough to add).
*/
$deb_export([$debug/0,$nodebug/0,$trace/1,$untrace/1,$spy/1,$nospy/1,
$trace/0,$untrace/0, $debugging/0, $deb_tracepreds/1, $deb_spypreds/1]).
/* $deb_use($glob,[$globalset/1,$gennum/1,$gensym/2]).
$deb_use($call,[call/1,'_$interp'/2,'_$call'/1]).
$deb_use($meta,[$functor/3,$univ/2,$length/2]).
$deb_use($name,[$name/2,$name0/2]).
$deb_use($bio,[$writename/1,$writeqname/1,$put/1,$nl/0,$tab/1,
$tell/1,$tell/2,$telling/1,$told/0,$get/1,$get0/1,$see/1,$seeing/1,
$seen/0]).
$deb_use($io,[$write/1,$writeq/1,$display/1,$print/1]).
$deb_use($assert,[$assert/1,$asserti/2,$assert_union/2,$assert_call_s/1,
$assert_get_prref/2,$assert_put_prref/2,$assert_abolish_i/1]).
$deb_use($retr,[$retract/1,_,_]).
$deb_use($defint,[$defint_call/4]).
$deb_use($buff,[$alloc_perm/2,$alloc_heap/2,$trimbuff/3,$buff_code/4,
$symtype/2,
$substring/6,$subnumber/6,$subdelim/6,$conlength/2,
$pred_undefined/1, $hashval/3]).
*/
$debug :-
$globalset($deb_ugging(1)),
$globalset($deb_tracing(1)),
$globalset($deb_invoke_num(1)),
$globalset($deb_skipping(0)),
$globalset($deb_quasiskip(0)).
$nodebug :-
$globalset($deb_ugging(0)),
$globalset($deb_skipping(1)),
$globalset($deb_tracing(0)).
$deb_trace(Call) :-
$deb_ugging(D),
(D=:=0,'_$call'(Call);
D=\=0,
$deb_invoke_num(N),N1 is N+1,$globalset($deb_invoke_num(N1)),
$deb_tracing(T),
(T=:=0,'_$call'(Call);
T=\=0, /* $deb_tracing */
$deb_quasiskip(S), /* skipping implies quasiskipping */
(S=\=0,'_$call'(Call) /* skipping or quasi_skipping */
;
S=:=0,$deb_enterpred(N,Call,nospy)
)
)
).
/* routine for processing spy points */
$deb_spy(Call) :-
$deb_ugging(D),
(D=:=0,'_$call'(Call)
;
D=\=0,
$deb_invoke_num(N),N1 is N+1,$globalset($deb_invoke_num(N1)),
$deb_skipping(S),
(S=\=0,'_$call'(Call) /* skipping */
;
S=:=0,
$globalset($deb_tracing(1)),
$deb_enterpred(N,Call,spy)
)
).
$deb_enterpred(N,Call,Spy) :-
$deb_traceget(N,Spy,'Call',Call,_),
$deb_tracing(D1),
(D1=:=0,'_$call'(Call)
;
D1=\=0, /* $deb_tracing */
('_$call'(Call),
$deb_tracing(D2),
(D2=:=0;
D2=\=0,
$globalset($deb_quasiskip(0)),$globalset($deb_skipping(0)),
$deb_traceget(N,Spy,'Exit',Call,_)
)
;
$globalset($deb_quasiskip(0)),$globalset($deb_skipping(0)),
$deb_tracing(D3),
D3=\=0, /*fail if not still tracing */
$deb_traceget(N,Spy,'Fail',Call,C2),
C2=114, /* r: retry, otherwise just fail */
$globalset($deb_invoke_num(N)), /* reset call number */
$deb_retry(Call,Spy)
)
).
$deb_retry(Call,spy) :- !,$deb_spy(Call).
$deb_retry(Call,nospy) :- $deb_trace(Call).
$deb_traceget(N,Spy,Type,Call,C) :-
$telling(Of),$tell(user),
$deb_writepref(Spy),
$writename(' ('),$writename(N),$writename(') '),
$writename(Type),$writename(': '),
Call =.. [Clpred|Args],
$name(Clpred,[99,111,100,101,36|Namelist]), /* code$ */
$name(Pname,Namelist),
Tcall =.. [Pname|Args],$write(Tcall),
$deb_prompt(Of,Type,Spy,C).
$deb_writepref(spy) :- $writename('**').
$deb_writepref(nospy) :- $writename(' ').
$deb_prompt(Of,'Call',nospy,C) :-
$deb_getonechar(C),$tell(Of),$deb_ug(C).
$deb_prompt(Of,'Fail',nospy,C) :-
/*nl,$tell(Of).*/
$deb_getonechar(C),$tell(Of),$deb_ug(C).
$deb_prompt(Of,'Exit',nospy,C) :-
$nl,$tell(Of).
$deb_prompt(Of,_,spy,C) :-
$deb_getonechar(C),$tell(Of),$deb_ug(C).
$deb_ug(10) :- !, /* <cr>: creep */
$globalset($deb_tracing(1)).
$deb_ug(97) :- !,abort. /* a: abort */
$deb_ug(98) :- !, /* break */
break. /* and creep when return */
$deb_ug(99) :- !, /* c: creep */
$globalset($deb_tracing(1)).
$deb_ug(101) :- !,halt. /* e: exit Prolog */
$deb_ug(102) :- !,fail. /* f: fail */
$deb_ug(108) :- !, /* l: leap */
$globalset($deb_tracing(0)).
$deb_ug(110) :- !, /* n: nodebug */
$nodebug.
$deb_ug(113) :- !, /* q: quasi-skip */
$globalset($deb_quasiskip(1)).
$deb_ug(114) :- !. /* r: retry */
$deb_ug(115) :- !, /* s: skip */
$globalset($deb_quasiskip(1)),
$globalset($deb_skipping(1)).
$deb_printhelp :- $telling(Of),$tell(user),
$tab(3),$writename('<cr>'),$tab(3),$writename('creep'),
$tab(10),$writename('a'),$tab(6),$writename('abort'),$nl,
$tab(3),$writename('c'),$tab(6),$writename('creep'),
$tab(10),$writename('f'),$tab(6),$writename('fail'),$nl,
$tab(3),$writename('r'),$tab(6),$writename('retry (fail)'),
$tab(3),$writename('h'),$tab(6),$writename('help'),$nl,
$tab(3),$writename('n'),$tab(6),$writename('nodebug'),
$tab(8),$writename('e'),$tab(6),$writename('exit'),$nl,
$tab(3),$writename('b'),$tab(6),$writename('break'),
$tab(10),$writename('s'),$tab(6),$writename('skip'),$nl,
$tab(3),$writename('q'),$tab(6),$writename('quasi-skip'),
$tab(5),$writename('l'),$tab(6),$writename('leap'),
$tell(Of).
$deb_getonechar(C) :-
$writename(' ? '),
$seeing(If),$see(user),$get0(C1),
(C1=:=10,C=C1,$see(If)
;
C1=\=10,$deb_skiptoaft,
(C1=:=104, /*help*/
$deb_printhelp,$deb_getonechar(C)
;
C1=\=104,C=C1,$see(If)
)
).
$deb_skiptoaft :- $get0(C),C=\=10,!,$deb_skiptoaft.
$deb_skiptoaft.
$spy(X) :- $untrace(X),$deb_setspy(X),$debug,$globalset($deb_tracing(0)).
$deb_setspy(X) :-
(nonvar(X), $deb_setspy0(X)) ;
(var(X), print('*** spy: argument cannot be a variable ***'), nl).
$deb_setspy0(P/A) :-
(atomic(P), integer(A)) ->
( ($symtype('_$spy_points'(_),Type),
Type > 0,
not('_$spy_points'(P/A)),!, /* noop if already there */
$assert('_$spy_points'(P/A)),
$deb_set(P,A,$deb_spy(_))
) ;
true
) ;
(print('*** illegal arguments to spy: '), print(P), print('/'), print(A), $nl).
$deb_setspy0([Pred|More]) :- $deb_setspy0(Pred),$deb_setspy(More).
$deb_setspy0([]).
$trace(X) :- $debug,$deb_settrace(X).
$deb_settrace(X) :-
(nonvar(X), $deb_settrace0(X)) ;
(var(X), print('*** trace: argument cannot be a variable ***'), nl).
$deb_settrace0(P/A) :-
(atomic(P), integer(A)) ->
(($symtype('_$traced_preds'(_),Type),
Type > 0,
'_$traced_preds'(P/A)
) ->
(print('*** trace: already tracing '), print(P), print('/'), print(A),
nl
) ;
($functor(F,P,A),
$symtype(F,Symtype),
((Symtype =:= 1 ; Symtype =:= 2) ->
($assert('_$traced_preds'(P/A)),
$deb_set(P,A,$deb_trace(_))
) ;
(print('*** '), print(P), print('/'), print(A),
print(' not defined, cannot trace ***'), $nl
)
)
)
) ;
(print('*** illegal argument to trace: '),print(X), nl).
$deb_settrace0([Pred|More]) :- $deb_settrace0(Pred),$deb_settrace(More).
$deb_settrace0([]).
/* add a check so that give error if try to trace undefined pred */
$deb_set(P,A,Tracerout) :-
$name(P,Pnamelist),
$name(Codepname,[99,111,100,101,36|Pnamelist]), /* code$p */
$functor(Codecall,Codepname,A),
$functor(Pcall,P,A),
/* make PRED and code$PRED have identical ep's */
$buff_code(Codecall,0,19 /* copy ep */ ,Pcall),
/* now define PRED(A1,..,An) :- $deb_trace(code$PRED(A1,..,An)). */
$defint_call(Pcall,A,Codecall,Tracerout).
$nospy(X) :- $deb_nospy(X),$trace(X),$nodebug.
$deb_nospy(X) :-
(nonvar(X), $deb_nospy0(X)) ;
(var(X), print('*** nospy: argument cannot be a variable ***'), nl).
$deb_nospy0(P/A) :-
(atomic(P), integer(A)) ->
( ($symtype('_$spy_points'(_),Type),
Type > 0,
'_$spy_points'(P/A), /* no-op if not there */
$retract('_$spy_points'(P/A)),!,
$deb_unset(P/A)
) ;
true
) ;
(print('*** illegal argument to nospy: '), print(P), print('/'), print(A), nl).
$deb_nospy0([Pred|More]) :- $deb_nospy0(Pred),$deb_nospy(More).
$deb_nospy0([]).
$untrace(X) :- $deb_unsettrace(X).
$deb_unsettrace(X) :-
(nonvar(X), $deb_unsettrace0(X)) ;
(var(X), print('*** untrace: argument cannot be a variable ***'), nl).
$deb_unsettrace0(P/A) :-
(atomic(P), integer(A)) ->
( ($symtype('_$traced_preds'(_),Type),
Type > 0,
'_$traced_preds'(P/A),
$retract('_$traced_preds'(P/A)),!,
$deb_unset(P/A)
) ;
true /* succeed even if retract fails */
) ;
(print('*** illegal argument to untrace: '), print(P), print('/'), print(A), nl).
$deb_unsettrace0([Pred|More]) :- $deb_unsettrace0(Pred),$deb_unsettrace(More).
$deb_unsettrace0([]).
$deb_unset(P/A) :- /* add checks */
$name(P,Pnamelist),
$name(Codepname,[99,111,100,101,36|Pnamelist]), /* code$p */
$functor(Codecall,Codepname,A),
$functor(Pcall,P,A),
$buff_code(Pcall,0,19 /* copy ep */ ,Codecall).
$trace :- $flags(1,1). /* Simulator generated trace */
$untrace :- $flags(1,0).
$debugging :- not( $debugging_0 ).
$debugging_0 :-
$deb_ugging(X),
((X =:= 1, print('Debug mode on')) ; (X =\= 1, print('Debug mode off'))), nl,
$deb_tracepreds(L0),
(L0 = [] -> ( print('No predicates being traced'), nl) ;
(print('Traced predicates: '), $nl, tab(5), $deb_printtrace(L0))
),
$deb_spypreds(L1),
(L1 = [] -> (print('No spy points set'), nl) ;
(print('Spy points set on: '), $nl, tab(5), $deb_printtrace(L1))
),
!,
fail.
$deb_tracepreds(L) :- $findall(X,'_$traced_preds'(X), L).
$deb_spypreds(L) :- $findall(X, '_$spy_points'(X), L).
$deb_printtrace([]) :- $nl.
$deb_printtrace([(P/N)|L]) :- print(P), print('/'), print(N), print(', '), $deb_printtrace(L).
/* ------------------------------ $deb.P ------------------------------ */